Rustin's Danish Oil 1.0 Ltr.
colourless wood oil, matt look, main component tung oil
€21.90 * €23.60 * (7.2% Saved)
Content: 1 Liter
Prices incl. VAT plus shipping costs
only 8 in stock available immediately
Estimated shipping tomorrow, 27.11.2024
Total: *
- Order number: 040501
Original RUSTIN'S DANISH OIL is valued as an excellent product by many woodworkers, and... more
Product information "Rustin's Danish Oil 1.0 Ltr."
Original RUSTIN'S DANISH OIL is valued as an excellent product by many woodworkers, and especially by turners all over the world. Contains matting agents for a matt look.
RUSTIN'S DANISH OIL is very easy and problem-free to use. No dangerous solvent vapors are generated during use.
RUSTIN'S DANISH OIL is non-toxic, so it is particularly suitable for sealing children's toys and kitchen appliances.
RUSTIN'S DANISH OIL is made exclusively from Natural resins and oils produced. An important ingredient is Chinese tung oil, which is extracted from the nuts of the tung tree.
RUSTIN'S DANISH OIL is highly economical, economical to use and therefore extremely inexpensive.
RUSTIN'S DANISH OIL is very easy and problem-free to use. No dangerous solvent vapors are generated during use.
RUSTIN'S DANISH OIL is non-toxic, so it is particularly suitable for sealing children's toys and kitchen appliances.
RUSTIN'S DANISH OIL is made exclusively from Natural resins and oils produced. An important ingredient is Chinese tung oil, which is extracted from the nuts of the tung tree.
RUSTIN'S DANISH OIL is highly economical, economical to use and therefore extremely inexpensive.
New bottle, tried and tested content: Rustins Danish Oil had a face for decades, which changed in 2012. The content is the tried and tested Rustins Danish Oil with the same recipe.
= 
Please note the following information for processing:
The container must be shaken vigorously before use. Sand all wooden surfaces well and carefully remove the sanding dust.
Apply RUSTIN'S DANISH OIL with a cotton cloth or a brush. After a few minutes, the material not absorbed by the wood must be wiped off. There must be no "puddles" left.
There are now different options for further treatment: With hard and dense woods, the first application can be "rubbed dry". It is now very easy for the wood turner. He lets the workpiece "run" and rubs it with a cloth made of wool or linen until the resulting frictional heat dries up the applied material and creates an elegant, non-sticky, silky shine. In the case of flat workpieces, the coating is allowed to dry and then rubbed until it is bright.
Soft and highly absorbent woods make a second and third application necessary. It must be ensured that the previous application is completely dry. The drying time depends on the ambient temperature and humidity. If the wood is heavily roughened, intermediate sanding is required. Fine sandpaper or steel wool is used for this. When smoothing with steel wool, Danish Oil can be applied at the same time.
It is very uneconomical to work from the original can. Danish Oil dries through oxidation, i.e. through the absorption of oxygen. Every time the jug is opened, fresh oxygen comes in. Over time, the rest will become thick and unusable. Therefore, a small amount should be filled into a bottle, which like the original container should be turned upside down when not in use.
Danish Oil is considered to be flammable. It should be stored out of the reach of children.
If the workpieces are to be given a different color or simply become darker, they must first be stained or colored. For this purpose, water-based color concentrates are recommended. (Processing information on request). The Danish Oil can then be applied to the workpiece as a surface protection after the dye has completely dried out.
Further information:
Description
Rustins Danish Oil is a mixture of oils (including Tung Oil), resins and desiccants, developed to create an attractive and permanently resistant wood surface treatment. The surface becomes satin matt. For shiny surfaces, we recommend Rustins Teak Oil.
Rustins Danish Oil is a mixture of oils (including Tung Oil), resins and desiccants, developed to create an attractive and permanently resistant wood surface treatment. The surface becomes satin matt. For shiny surfaces, we recommend Rustins Teak Oil.
Use
For all raw wooden surfaces indoors and outdoors, doors, carpentry, garden and room furniture.
For all raw wooden surfaces indoors and outdoors, doors, carpentry, garden and room furniture.
Special features
Danish Oil reinforces the natural structure of wood and veneered surfaces. A natural, open-pored surface with a silky sheen is achieved.
Danish Oil meets the requirements of BS EN 71 Part 3 of 1995 and is therefore suitable for toys.
Danish Oil reinforces the natural structure of wood and veneered surfaces. A natural, open-pored surface with a silky sheen is achieved.
Danish Oil meets the requirements of BS EN 71 Part 3 of 1995 and is therefore suitable for toys.
Preparation
The wood must be clean, smooth, dry and free of wax, dust and other impurities. Remove wax with Rustins White Spirit or Rustins Surface Cleaner with a clean, lint-free cloth. Paints and varnishes must be coated with e.g. Rustins Strypit Paint or Varnish Stripper can be removed.
The wood can be coloured, bleached or stained with Danish Oil before treatment.
The wood must be clean, smooth, dry and free of wax, dust and other impurities. Remove wax with Rustins White Spirit or Rustins Surface Cleaner with a clean, lint-free cloth. Paints and varnishes must be coated with e.g. Rustins Strypit Paint or Varnish Stripper can be removed.
The wood can be coloured, bleached or stained with Danish Oil before treatment.
Application
Apply Danish Oil with a clean cloth or brush and after a few minutes wipe off any excess oil. For outdoor use, Danish Oil should be applied generously with a brush the first time and allowed to dry off without wiping.
Lugs can be removed by rubbing in oil again after the last application with a firm sponge in the direction of the grain and then with a clean one Cloth wipes away excess.
Apply Danish Oil with a clean cloth or brush and after a few minutes wipe off any excess oil. For outdoor use, Danish Oil should be applied generously with a brush the first time and allowed to dry off without wiping.
Lugs can be removed by rubbing in oil again after the last application with a firm sponge in the direction of the grain and then with a clean one Cloth wipes away excess.
Layers
Raw wood requires 3 coats. Wood in the outdoor area sometimes requires further coatings (see below)
Raw wood requires 3 coats. Wood in the outdoor area sometimes requires further coatings (see below)
Drying time
4-6 hours, depending on the type of wood, temperature and humidity
4-6 hours, depending on the type of wood, temperature and humidity
Waiting time before painting over
After the previous coat has dried
After the previous coat has dried
Processing temperature
Ideally 15-25°C, do not process below 5°C, protect against rain outdoors until it is dry
Ideally 15-25°C, do not process below 5°C, protect against rain outdoors until it is dry
Yield
approx. 14m² per liter with one coating, depending on the absorbency of the wood
approx. 14m² per liter with one coating, depending on the absorbency of the wood
Shelf life
Regular post-treatment is required. Before post-treatment, the surfaces should be cleaned with e.g. Rustins White Spirit.
Regular post-treatment is required. Before post-treatment, the surfaces should be cleaned with e.g. Rustins White Spirit.
Compatibility
Danish Oil can be applied to the following Rustins products: Wood Dye, Grainfiller, Woodstopping. Wood Dye (colour) can also be mixed with Danish Oil. Rustins Polyurethane Varnish can be applied over Danish Oil. Danish Oil can also be used as a primer. The surface must be dry and clean before painting.
Danish Oil can be applied to the following Rustins products: Wood Dye, Grainfiller, Woodstopping. Wood Dye (colour) can also be mixed with Danish Oil. Rustins Polyurethane Varnish can be applied over Danish Oil. Danish Oil can also be used as a primer. The surface must be dry and clean before painting.
Important for outdoor use
In outdoor areas, the coating with Danish Oil must be repeated at least once a year. Horizontal surfaces and surfaces that are particularly exposed to the weather may require more frequent treatment. Oak and hardwood have a particularly strong tendency to discolour due to weathering. Additional layers of Danish Oil are advisable here to adequately seal these woods. Up to 6 orders are particularly useful for cross-cut wood surfaces.
In outdoor areas, the coating with Danish Oil must be repeated at least once a year. Horizontal surfaces and surfaces that are particularly exposed to the weather may require more frequent treatment. Oak and hardwood have a particularly strong tendency to discolour due to weathering. Additional layers of Danish Oil are advisable here to adequately seal these woods. Up to 6 orders are particularly useful for cross-cut wood surfaces.
Storage / shelf life
If stored in a cool and dry place, Danish Oil can be kept for several years in the tightly closed original bottle.
If stored in a cool and dry place, Danish Oil can be kept for several years in the tightly closed original bottle.
Hazards
Flammable. Avoid eye and skin contact. Use only in well-ventilated rooms or outdoors. Do not smoke. Keep away from sparks or other sources of fire. Keep the packaging tightly closed.
A comprehensive safety data sheet is available on request.
Important: Cloths etc. contaminated with Danish Oil should be well ventilated and dry out flat, otherwise spontaneous ignition is possible.
Flammable. Avoid eye and skin contact. Use only in well-ventilated rooms or outdoors. Do not smoke. Keep away from sparks or other sources of fire. Keep the packaging tightly closed.
A comprehensive safety data sheet is available on request.
Important: Cloths etc. contaminated with Danish Oil should be well ventilated and dry out flat, otherwise spontaneous ignition is possible.
Cleaning of work equipment
Brushes or brushes should be cleaned with White Spirit or Rustins Brush Cleaner while they are still damp. When they have dried on or off, clean with Rustins Brush Restorer.
Brushes or brushes should be cleaned with White Spirit or Rustins Brush Cleaner while they are still damp. When they have dried on or off, clean with Rustins Brush Restorer.
Related links to "Rustin's Danish Oil 1.0 Ltr."
Available downloads:
Read, write and discuss reviews... more
Customer evaluation for "Rustin's Danish Oil 1.0 Ltr."
Write an evaluation
Um eine Bewertung abgeben zu können, müssen Sie sich zunächst anmelden.
You have last looked at the following articles: